Enigma2

Enigma2 Auto Script Instructions

Enigma 2 is one of the most popular devices for IPTV broadcasting. The codes that can be used in Enigma2 have been prepared exclusively by IPTV Angels, which you can click here to see the packages and purchase the IPTV service.

Note : This is the old way of using the Enigma device. According to the manufacturer’s instructions, it is recommended to use a modification plugin for better quality and EPG. Also, using the new method has become much easier. Click here to use the method (X-Streamity).

Step 1: Start by downloading the necessary items.To connect to an Enigma2 device, you usually need the right software, Dream Box Control being one of the most used by many users. You can download this software from the dedicated Dream Box Control website at https://dreambox-control-center.software.informer.com/ . You must connect to your Enigma box using Dreambox Control Center E2 and click on “Telenet“. But first, you must find the IP address of your enigma2 box. We will discuss this further ahead in this article.

Step 2: To connect, we need to know the box IP address, username, and password (username and password usually is root/root). Now about the IP, click Menu button on the remote controller. Go to Setting then Network Settings. You should see something like the below image:

Step 3: Once connected to your box via Dreambox Control Center, it`s time to execute the Autoscript command which should be provided by your IPTV provider. These scripts can be given in two versions:

– OE1.6 version which uses Python 2.6: It is advised to use this version on non-Dreambox receivers.

– OE2.0 version which uses Python 2.7: It is advised to use this version on Dreambox receivers.

So for our Dreambox of this example the command line should be like this:

wget -O /etc/enigma2/iptv.sh “http://tv.yourdns.com/get.php?username=your-line-username&password=your-line-password&type=enigma216_script&output=ts” && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh

Copy/paste this command line on Telnet Terminal and hit enter.

Note : If you have received your service from us, special Enigma2 codes will be emailed to you. You can also access the codes through your user panel and edit your packages. Click here for a guide to entering the user panel.

Step 4: We suggest everyone to reboot the device once you execute the Autoscript command. To reboot the device just write “reboot” on Telnet terminal

Step 5: After the Reboot, you will see on Bouquet list a new Group called “IPTV”